Transducer Accessories

Airmar MM1-DST-8G Mix and Match Garmin Blue 8-Pin Cable [MM1-DST-8G]

MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to...

Navico 9-Pin Black to 7-Pin Blue Adapter Cable f/Non-CHIRP Transducers [000-12571-001]

9-Pin Black to 7-Pin Blue Adapter Cable for Non-CHIRP TransducersConnects a non-CHIRP transducer with a 9-pin black connector to the older 7-pin blue sockets on displays and echosounder modules. For use with transducers that have an analog...

Humminbird MEGA Live 2 Transom Mount Bracket [740252-1]

MEGA Live 2 Transom Mount BracketThe MEGA Live 2 Transom Mount expands the versatility of MEGA Live 2, allowing anglers to install the transducer on the back of the boat, like traditional 2D, Down Imaging, and Side Imaging transom mount sonar...

Attwood Transducer Mounting Plate [94110-5]

Transducer Mounting PlateFeatures:Marine-grade polymer plate will not warp or corrodePremium materials; unaffected by UV raysMounts easily with only 2 screwsAll hardware included Specifications:Type: Mounting BracketsBox Dimensions: 1"H x 4"W...

Airmar MM-HB Mix Match Cable 5-Pin 600W Series w/Humminbird #9 Connector - 9M [MM-HB]

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications:Sensor Connector: MMDisplay Connector: HBMix and Match Series: 5-Pin 600 WattCountry of Origin: USACable-Length: 9 m (30')...

Echonautics Hydrodynamic Fairing Block f/CB101 Series Transducers [K10TDD001A]

Hydrodynamic Fairing Block for CB101 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the installation of any traditional stem transducers to the...

Echonautics Hydrodynamic Fairing Block f/CB131 Series Transducers [K10TDC001A]

Hydrodynamic Fairing Block for CB131 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the installation of any traditional stem transducers to the...

Furuno FCV800 Y-Cable f/Multi-Channel CHIRP Transducer 12-Pin to 2 10-Pin [001-636-150-00]

FCV800 Y-Cable f/Multi-Channel CHIRP Transducer Specifications:12-Pin to 2 10-PinSpecifically for FCV800For dual channel CHIRP transducerY-cableThis product may not be returned to the original point of purchase. Please contact the manufacturer...

FORESIGHT Forward-Facing Motorized Sonar Mount [1003]

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling motor but still be controlled...

Echonautics 1M Adapter Cable w/Male 9-Pin Navico Connector f/Echonautics 300W, 600W 1kW Transducers [CBCCMS0502]

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

Echonautics 1M Adapter Cable w/Female 8-Pin Garmin Connector f/Echonautics 300W, 600W 1kW Transducers [CBCCMS0503]

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

Echonautics 1M Adapter Cable w/Male 8-Pin Black Box Connector f/Echonautics 300W, 600W 1kW Transducers [CBCCMS0501]

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units.