Hardware

Barton BPI-32 Bulkhead Pipe Gland Reducer 32mm f/BPG-50 [BPI-32]

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They...

Barton BPI-25 Bulkhead Pipe Gland Reducer 25mm f/BPG-50 [BPI-25]

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads...

Barton BPI-20 Bulkhead Pipe Gland Reducer 20mm f/BPG-50 [BPI-20]

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads...

Barton Traveler Eye (Pair) - Size 0, 16mm [18112]

Traveller Eye (Pair) Size 0, 16mmFeatures:Size 0 16mm Traveller Eye PairRecirculating ball bearing dinghy traveller rangeComplementing Barton’s successful larger traveller range, the dinghy traveller system uses proven recirculating Delrin ball...

Ronstan Series 40 High Load Exit Box f/Single Rope & Wire [RF41712]

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through...

Schaefer 2" Delrin Ball Bearing Sheave [62-152-02A]

2" Delrin Ball Bearing SheaveSpecifications:Material: Delrin (BB)Max Line 1/2" (13 mm)Outside Dia. 2" (51 mm)Inside Dia 3/16" (5 mm)Width 5/8" (16 mm)

Barton Deck Organizer Size 1 - 3 Sheave [81583]

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with...

Barton Spinnaker Pole Slide Car (32mm) [32302]

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Barton Deck Plate w/Fixing Eye w/Blanking Plug - M12 Eye [60362]

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...

Barton Tubular Cleat - 6mm [52120]

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications:Weight: 5gDimensions: 55mm x 13mm x 14mmSize: 55mmFastenings: 4mm

Barton Deck Eye - Stainless Steel - 14mm [60410]

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications:Stainless SteelDeck EyeSingle14mm Height x 14mm Width x 5mm Fastenings

Barton 7mm Dyneema Loop w/High Load Eye - 22mm Bore [60461]

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional...